What is the role of lubricants in thermoforming machines?
Release time : 2022-05-14 10:49 Number of views : 311second1. Thin oil lubrication
This cooling or separation is mainly aimed at parts with high heat production, such as the surface of edge sawing machine, which can prevent the friction between objects from generating a lot of heat, resulting in premature wear and deformation.
2. Oil air lubrication
Lubrication is achieved by gas flow. In the process of gas flow, a small amount of oil droplets attached to the pipe wall are sprayed on the friction surface. This method is economical and universal,
3. Oil mist lubrication
The method is sprayed on the friction surface in the form of fog. The lubricant has high friction and belongs to micro lubrication.
4. Grease lubrication
No matter how high the machining accuracy is, there is certain friction on the production and machining surface of the equipment. This teaching method reduces the friction to a certain extent and improves the operation and development process of enterprises.
The above are four common methods, each of which has its own characteristics. When selecting lubricating oil, it can be selected according to the thermoforming machine specification and power supply.
Thermoforming machine is a common plastic processing equipment, which is configured by many blister manufacturers.
Many manufacturers are concerned about energy conservation. How can thermoforming machine save energy? To a large extent, the energy-saving effect of reducing heating energy consumption is very significant.
In order to improve the energy-saving performance of the thermoforming machine and control the power consumption of the heating zone, this is the key step of the energy-saving of the thermoforming machine.
The use of closed oven will undoubtedly greatly reduce the energy consumption of thermoforming machine. Therefore, when purchasing equipment, blister manufacturers can pay attention to whether the thermoforming machine has a closed heating function, which will better control the cost.
Thermoforming machine system is the main component of thermoforming packaging machine and the key process of thermoforming packaging. The packaging film is thermoformed here to form a container of fillable materials, which provides a prerequisite for the entire packaging.
The thermoforming machine system includes a preheating part and a thermoforming part. The bottom film is pulled close and stays in the preheating zone for heating. As shown in the figure, the preheating part is composed of a cover body and a heating plate, which is fixedly installed on the frame. When the film is running, it is pasted flat under the heating surface. The distance between the heating plate and the film surface can be adjusted by screws to achieve an ideal heating effect. The function of preheating is to prepare for the next thermoforming process and improve the thermoforming efficiency.
